so here's what i know. shovelhead sprocket + '02 mag wheel = no wueno. the center of sprocket is 2" and the wheel is 2 1/4". so gotta figure that out,find a different sprocket or re-build and powder (chrome was shot) the old hub and wheel and just go with it
Bore the center out of the sprocket. I've had to do it on pre-99 rotors to fit on a '00-up hub before.
ReplyDeleteyup. i beleive your right, i want to use this wheel. how'd you go about it?
ReplyDeleteMeasure the outside diameter of the lip on the hub, take it to a machine shop and get them to bore the center of the rotor out. The bolt pattern is the same, but the ID is different.
ReplyDelete